比如，经常会遇到这样的问题**************************

[[email protected] local]# pwd
/usr/local
[[email protected] local]# ping www.baidu.com
ping: unknown host www.baidu.com
[[email protected] local]#

习惯做法是，

[[email protected] local]# vi /etc/resolv.conf

# Generated by NetworkManager

# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
#
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
# DOMAIN=lab.foo.com bar.foo.com

nameserver  8.8.8.8

一般，我们会这样的，但是发现带图形界面安装的CentOS6.5，会在每次开机，会自动清除掉/etc/resolv.conf，所追加的内容，为此。

CentOS 6.5静态IP的设置（NAT和桥接都适用）

解决办法：

[[email protected] local]# vi /etc/sysconfig/network-scripts/ifcfg-eth0

DNS1=192.168.80.2 　　　　　　//这个第一，很重要！！！自己的网关

DNS2=8.8.8.8

DNS3=114.114.114.114

DNS4=223.5.5.5

如下图

重启网卡，service network restart 

ok。

[[email protected]urceCompiler local]# service network restart
Shutting down interface eth0: Device state: 3 (disconnected)
[ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: Active connection state: activated
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/2
[ OK ]
[[email protected] local]# ping www.baidu.com
PING www.a.shifen.com (111.13.100.92) 56(84) bytes of data.
64 bytes from 111.13.100.92: icmp_seq=1 ttl=128 time=55.1 ms
64 bytes from 111.13.100.92: icmp_seq=2 ttl=128 time=55.1 ms
64 bytes from 111.13.100.92: icmp_seq=3 ttl=128 time=55.3 ms
^C
--- www.a.shifen.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2698ms
rtt min/avg/max/mdev = 55.159/55.240/55.388/0.104 ms
[[email protected] local]#

本文转自大数据躺过的坑博客园博客，原文链接：http://www.cnblogs.com/zlslch/p/5826369.html，如需转载请自行联系原作者