RHEL6.5下安装OpenSIPS

1.修改服务器的主机名称

[[email protected] ~]# vim /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=localhost.localdomain
HOSTNAME=OpenSIPS.clvn.com.cn

2.查看NetworkManager服务的状态

[[email protected] ~]# service NetworkManager status
NetworkManager (pid 2945) 正在运行...

3.将NetworkManager服务关闭

[[email protected] ~]# service NetworkManager stop
停止 NetworkManager 守护进程： [确定]

4.设置NetworkManager服务开机时自动关闭
[[email protected] ~]# chkconfig --level 35 NetworkManager off

5.查看NetworkManager服务开机时是否处于自动关闭状态
[[email protected] ~]# chkconfig --list NetworkManager
NetworkManager 0:关闭 1:关闭 2:启用 3:关闭 4:启用 5:关闭 6:关闭

6.配置IP地址
[[email protected] ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
HWADDR=00:0C:29:6C:A2:40
TYPE=Ethernet
UUID=9b5a23e3-7c38-4b6e-b7ac-088f33c8727b
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
IPADDR=192.168.0.28
NETMASK=255.255.255.0
IPV6INIT=no
USERCTL=no

7.设置主机名称和IP地址的对应关系

[[email protected] ~]# vim /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.0.28 OpenSIPS.clvn.com.cn                               OpenSIPS

8.重新启动服务器

[[email protected] ~]# reboot

9.查看主机名称

[[email protected] ~]# hostname
OpenSIPS.clvn.com.cn

10.查看ip地址是否生效

[[email protected] ~]# ifconfig eth0
eth0      Link encap:Ethernet HWaddr 00:0C:29:5B:82:3D
          inet addr:192.168.0.28 Bcast:192.168.0.255 Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fe5b:823d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b) TX bytes:746 (746.0 b)

11.安装opensips所依赖的软件包

[[email protected] ~]# yum -y install gcc make
[[email protected] ~]# yum -y install flex bison ncurses ncurses-devel openssl-devel zlib-devel
[[email protected] ~]# yum -y install mysql mysql-server mysql-libs mysql-devel

12.查看opensips软件包

[[email protected] ~]# cd /usr/local
[[email protected] local]# ls
bin games lib libexec sbin src
etc include lib64 opensips-1.11.1_src.tar.gz share

13.解压该软件包

[[email protected] local]# tar -zxvf opensips-1.11.1_src.tar.gz

14.查看解压后生成的目录

[[email protected] local]# ls
bin games lib libexec opensips-1.11.1-tls share
etc include lib64 opensips-1.11.1_src.tar.gz sbin src

15.查看当前所在的目录

[[email protected] opensips-1.11.1-tls]# pwd
/usr/local/opensips-1.11.1-tls

16.编译

[[email protected] opensips-1.11.1-tls]# make prefix=/ all include_modules="db_mysql"

17.安装

[[email protected] opensips-1.11.1-tls]# make prefix=/ install include_modules="db_mysql"

18.修改配置文件

[[email protected] ~]# vim /etc/opensips/opensipsctlrc