CentOS7系列--3.2CentOS7中配置iSCSI服务

CentOS7配置iSCSI服务

在网络上的存贮服务为iSCSI Target，而连接到iSCSI Target服务的叫iSCSI Initiator

1. 直接配置iSCSI Target服务

1.1. 安装targetcli软件

[[email protected] ~]# yum install -y targetcli

Loaded plugins: fastestmirror

base | 3.6 kB 00:00

extras | 3.4 kB 00:00

updates | 3.4 kB 00:00

(1/4): base/7/x86_64/group_gz | 156 kB 00:00

(2/4): extras/7/x86_64/primary_db | 129 kB 00:00

1.2. 配置iSCSI Target服务

在/var/lib/iscsi_disks目录下，创建一个磁盘镜像文件作为SCSI驱动器

[[email protected] ~]# mkdir /var/lib/iscsi_disks

1.2.1. 进入targetcli中进行设置

[[email protected] ~]# targetcli

Warning: Could not load preferences file /root/.targetcli/prefs.bin.

targetcli shell version 2.1.fb46

Copyright 2011-2013 by Datera, Inc and others.

For help on commands, type 'help'.

/> cd backstores/fileio

1.2.2. 创建一个磁盘镜像文件disk01.img，名称为disk01

/backstores/fileio> create disk01 /var/lib/iscsi_disks/disk01.img 5G

Created fileio disk01 with size 5368709120

/backstores/fileio> cd /iscsi

1.2.3. 创建一个target

/iscsi> create iqn.2017-10.com.smartmap:storage.target00

Created target iqn.2017-10.com.smartmap:storage.target00.

Created TPG 1.

Global pref auto_add_default_portal=true

Created default portal listening on all IPs (0.0.0.0), port 3260.

/iscsi> cd iqn.2017-10.com.smartmap:storage.target00/tpg1/luns

1.2.4. 设置LUN

/iscsi/iqn.20...t00/tpg1/luns> create /backstores/fileio/disk01

Created LUN 0.

/iscsi/iqn.20...t00/tpg1/luns> cd ../acls

1.2.5. 设置ACL

/iscsi/iqn.20...t00/tpg1/acls> create iqn.2017-10.com.smartmap:192.168.1.101

Created Node ACL for iqn.2017-10.com.smartmap:192.168.1.101

Created mapped LUN 0.

1.2.6. 为认证建立UserID

/iscsi/iqn.20...t00/tpg1/acls> set auth userid=username

Unknown configuration group: auth

/iscsi/iqn.20...t00/tpg1/acls> cd iqn.2017-10.com.smartmap:192.168.1.101

/iscsi/iqn.20...192.168.1.101> set auth userid=username

Parameter userid is now 'username'.

/iscsi/iqn.20...192.168.1.101> set auth password=password

Parameter password is now 'password'.

/iscsi/iqn.20...192.168.1.101> exit

Global pref auto_save_on_exit=true

Last 10 configs saved in /etc/target/backup.

Configuration saved to /etc/target/saveconfig.json

1.3. 配置完成后查看其监听

[[email protected] ~]# ss -napt | grep 3260

LISTEN 0 256 *:3260 *:*

1.4. 开启target服务

[[email protected] ~]# systemctl enable target

Created symlink from /etc/systemd/system/multi-user.target.wants/target.service to /usr/lib/systemd/system/target.service.

[[email protected] ~]#

1.5. 在防火墙中设置iSCSI Target服务

[[email protected] ~]# firewall-cmd --add-service=iscsi-target --permanent

success

[[email protected] ~]# firewall-cmd --reload

success

[[email protected] ~]#

2. 应用scsi-target-utils配置iSCSI Initiator

2.1. 安装scsi-target-utils软件

[[email protected] ~]# yum -y install epel-release

Loaded plugins: fastestmirror

Loading mirror speeds from cached hostfile

* base: mirrors.tuna.tsinghua.edu.cn

* extras: mirrors.tuna.tsinghua.edu.cn

* updates: mirrors.tuna.tsinghua.edu.cn

Resolving Dependencies

--> Running transaction check

---> Package epel-release.noarch 0:7-9 will be installed

--> Finished Dependency Resolution

Dependencies Resolved

[[email protected] ~]# yum --enablerepo=epel install -y scsi-target-utils

Loaded plugins: fastestmirror

epel/x86_64/metalink | 6.1 kB 00:00

epel | 4.3 kB 00:00

(1/3): epel/x86_64/group_gz | 261 kB 00:00

2.2. 配置iSCSI Target服务

2.2.1. 创建一个磁盘镜像文件作为SCSI驱动器

在/var/lib/iscsi_disks目录下，创建一个磁盘镜像文件作为SCSI驱动器

[[email protected] ~]# mkdir /var/lib/iscsi_disks

[[email protected] ~]# dd if=/dev/zero of=/var/lib/iscsi_disks/disk01.img count=0 bs=1 seek=5G

0+0 records in

0+0 records out

0 bytes (0 B) copied, 0.000322535 s, 0.0 kB/s

[[email protected] ~]#

2.2.2. 修改targets.conf文件

[[email protected] ~]# vi /etc/tgt/targets.conf

[[email protected] ~]#

在文件结尾加上如下的内容

<target iqn.2017-10.com.smartmap:target00>

backing-store /var/lib/iscsi_disks/disk01.img

initiator-address 192.168.1.103

incominguser username password

</target>

2.2.3. 修改SELinux的Context设置

[[email protected] ~]# chcon -R -t tgtd_var_lib_t /var/lib/iscsi_disks

chcon: can't apply partial context to unlabeled file ‘disk01.img’

chcon: can't apply partial context to unlabeled file ‘/var/lib/iscsi_disks’

[[email protected] ~]# semanage fcontext -a -t tgtd_var_lib_t /var/lib/iscsi_disks/

-bash: semanage: command not found

[[email protected] ~]#

2.2.4. 在防火墙中设置iSCSI Target服务

[[email protected] ~]# firewall-cmd --add-service=iscsi-target --permanent

success

[[email protected] ~]# firewall-cmd --reload

success

[[email protected] ~]#

2.2.5. 开启tgtd服务

[[email protected] ~]# systemctl start tgtd

[[email protected] ~]# systemctl enable tgtd

Created symlink from /etc/systemd/system/multi-user.target.wants/tgtd.service to /usr/lib/systemd/system/tgtd.service.

[[email protected] ~]#

3. 配置iSCSI Initiator

3.1. 安装iscsi-initiator-utils软件

[[email protected] ~]# yum install -y iscsi-initiator-utils

Loaded plugins: fastestmirror

base | 3.6 kB 00:00

extras | 3.4 kB 00:00

3.2. 配置iSCSI Initiator连接的服务

[[email protected] ~]# vi /etc/iscsi/initiatorname.iscsi

修改成如下的内容

InitiatorName=iqn.2017-10.com.smartmap:192.168.1.101

3.3. 配置iSCSI Initiator连接的认证信息

[[email protected] ~]# vi /etc/iscsi/iscsid.conf

node.session.auth.authmethod = CHAP

# To set a CHAP username and password for initiator

# authentication by the target(s), uncomment the following lines:

node.session.auth.username = username

node.session.auth.password = password

3.4. 发现iSCSI-Target服务

[[email protected] ~]# iscsiadm -m discovery -t sendtargets -p 192.168.1.101

192.168.1.101:3260,1 iqn.2017-10.com.smartmap:storage.target00

[[email protected] ~]#

3.5. 查看iSCSI-Target服务连接状态

[[email protected] ~]# iscsiadm -m node -o show

# BEGIN RECORD 6.2.0.874-2

node.name = iqn.2017-10.com.smartmap:storage.target00

node.tpgt = 1

node.startup = automatic

node.leading_login = No

iface.hwaddress = <empty>

iface.ipaddress = <empty>

iface.iscsi_ifacename = default

iface.net_ifacename = <empty>

iface.gateway = <empty>

iface.subnet_mask = <empty>

iface.transport_name = tcp

iface.initiatorname = <empty>

iface.state = <empty>

iface.vlan_id = 0

iface.vlan_priority = 0

iface.vlan_state = <empty>

iface.iface_num = 0

iface.mtu = 0

iface.port = 0

iface.bootproto = <empty>

iface.dhcp_alt_client_id_state = <empty>

iface.dhcp_alt_client_id = <empty>

iface.dhcp_dns = <empty>

iface.dhcp_learn_iqn = <empty>

iface.dhcp_req_vendor_id_state = <empty>

iface.dhcp_vendor_id_state = <empty>

iface.dhcp_vendor_id = <empty>

iface.dhcp_slp_da = <empty>

iface.fragmentation = <empty>

iface.gratuitous_arp = <empty>

iface.incoming_forwarding = <empty>

iface.tos_state = <empty>

iface.tos = 0

iface.ttl = 0

iface.delayed_ack = <empty>

iface.tcp_nagle = <empty>

iface.tcp_wsf_state = <empty>

iface.tcp_wsf = 0

iface.tcp_timer_scale = 0

iface.tcp_timestamp = <empty>

iface.redirect = <empty>

iface.def_task_mgmt_timeout = 0

iface.header_digest = <empty>

iface.data_digest = <empty>

iface.immediate_data = <empty>

iface.initial_r2t = <empty>

iface.data_seq_inorder = <empty>

iface.data_pdu_inorder = <empty>

iface.erl = 0

iface.max_receive_data_len = 0

iface.first_burst_len = 0

iface.max_outstanding_r2t = 0

iface.max_burst_len = 0

iface.chap_auth = <empty>

iface.bidi_chap = <empty>

iface.strict_login_compliance = <empty>

iface.discovery_auth = <empty>

iface.discovery_logout = <empty>

node.discovery_address = 192.168.1.101

node.discovery_port = 3260

node.discovery_type = send_targets

node.session.initial_cmdsn = 0

node.session.initial_login_retry_max = 8

node.session.xmit_thread_priority = -20

node.session.cmds_max = 128

node.session.queue_depth = 32

node.session.nr_sessions = 1

node.session.auth.authmethod = CHAP

node.session.auth.username = username

node.session.auth.password = ********

node.session.auth.username_in = <empty>

node.session.auth.password_in = <empty>

node.session.timeo.replacement_timeout = 120

node.session.err_timeo.abort_timeout = 15

node.session.err_timeo.lu_reset_timeout = 30

node.session.err_timeo.tgt_reset_timeout = 30

node.session.err_timeo.host_reset_timeout = 60

node.session.iscsi.FastAbort = Yes

node.session.iscsi.InitialR2T = No

node.session.iscsi.ImmediateData = Yes

node.session.iscsi.FirstBurstLength = 262144

node.session.iscsi.MaxBurstLength = 16776192

node.session.iscsi.DefaultTime2Retain = 0

node.session.iscsi.DefaultTime2Wait = 2

node.session.iscsi.MaxConnections = 1

node.session.iscsi.MaxOutstandingR2T = 1

node.session.iscsi.ERL = 0

node.session.scan = auto

node.conn[0].address = 192.168.1.101

node.conn[0].port = 3260

node.conn[0].startup = manual

node.conn[0].tcp.window_size = 524288

node.conn[0].tcp.type_of_service = 0

node.conn[0].timeo.logout_timeout = 15

node.conn[0].timeo.login_timeout = 15

node.conn[0].timeo.auth_timeout = 45

node.conn[0].timeo.noop_out_interval = 5

node.conn[0].timeo.noop_out_timeout = 5

node.conn[0].iscsi.MaxXmitDataSegmentLength = 0

node.conn[0].iscsi.MaxRecvDataSegmentLength = 262144

node.conn[0].iscsi.HeaderDigest = None

node.conn[0].iscsi.IFMarker = No

node.conn[0].iscsi.OFMarker = No

# END RECORD

[[email protected] ~]#

3.6. 登录到iSCSI Target

[[email protected] ~]# iscsiadm -m node --login

Logging in to [iface: default, target: iqn.2017-10.com.smartmap:storage.target00 , portal: 192.168.1.101,3260] (multiple)

Login to [iface: default, target: iqn.2017-10.com.smartmap:storage.target00, por tal: 192.168.1.101,3260] successful.

[[email protected] ~]#

3.7. 验证建立会话状态

[[email protected] ~]# iscsiadm -m session -o show

tcp: [1] 192.168.1.101:3260,1 iqn.2017-10.com.smartmap:storage.target00 (non-flash)

[[email protected] ~]#

3.8. 验证分区

3.9. 在iSCSI Initiator中应用iSCSI Target提供的分区

3.9.1. 创建分区Label

[[email protected] ~]# parted --script /dev/sdb "mklabel msdos"

[[email protected] ~]#

3.9.2. 创建分区

[[email protected] ~]# parted --script /dev/sdb "mkpart primary 0% 100%"

3.9.3. 格式化文件系统

[[email protected] ~]# mkfs.xfs -i size=1024 -s size=4096 /dev/sdb1

meta-data=/dev/sdb1 isize=1024 agcount=4, agsize=327424 blks

= sectsz=4096 attr=2, projid32bit=1

= crc=1 finobt=0, sparse=0

data = bsize=4096 blocks=1309696, imaxpct=25

= sunit=0 swidth=0 blks

naming =version 2 bsize=4096 ascii-ci=0 ftype=1

log =internal log bsize=4096 blocks=2560, version=2

= sectsz=4096 sunit=1 blks, lazy-count=1

realtime =none extsz=4096 blocks=0, rtextents=0

[[email protected] ~]#

3.9.4. 挂载分区

[[email protected] ~]# mount /dev/sdb1 /mnt

3.9.5. 查看分区验证

[[email protected] ~]# df -hT