windows10卸载程序_如何从双启动安装程序中卸载或删除Windows 8

windows10卸载程序

So far we have shown you how to setup a classic dual-boot for Windows 8, and we even showed you how to do it without creating a new partition. If you still aren’t sold on the new version of Windows, here’s how to remove it entirely.

到目前为止，我们已经向您展示了如何为Windows 8设置经典的双重引导 ，甚至还向您展示了如何在不创建新分区的情况下进行操作 。 如果仍未在新版本的Windows上出售您，请按照以下方法将其完全删除。

Note: We will be playing with the Boot Configuration Database in this guide, and as this is an integral part of the boot process you should follow this guide extremely carefully, or suffer the consequences, which will most likely be an unbootable PC. This guide also assumes that you have dual-booted according to our articles, and do not have any other operating systems besides Windows 7 and Windows 8 installed.

注意：我们将在本指南中使用“引导配置数据库”，并且由于它是引导过程中必不可少的部分，因此您应格外小心地遵循本指南，否则将导致后果，这很可能是无法启动的PC。 本指南还假定您已根据我们的文章进行了双重引导，并且除Windows 7和Windows 8之外没有其他操作系统。

恢复引导加载程序 (Restoring The Boot Loader)

Note: This section applies to everyone who wishes to uninstall Windows 8 from both the classic dual-booting method, as well as the VHD method.

注意：本节适用于希望从经典双启动方法以及VHD方法中卸载Windows 8的所有用户。

Since we will be removing Windows 8, the first thing you will need to do is boot into your Windows 7 instance. Now we could always use the command line to manipulate the BCD settings, but there is a much easier way using a tool called EasyBCD, so we will go that route. Once you have downloaded a copy, it’s an easy “next, next, finish” type of install. Once it has installed, go ahead and launch it.

由于我们将要删除Windows 8，因此您需要做的第一件事就是启动Windows 7实例。 现在，我们始终可以使用命令行来操作BCD设置，但是使用一种名为EasyBCD的工具要容易得多，因此我们将继续。 下载副本后 ，这是一种简单的“下一步，下一步，完成”安装。 安装完成后，继续启动它。

From here we need to delete Windows 8 from the Boot Configuration Database, on the left hand side you will see a button labeled “Edit Boot Menu” click it to get started.

从这里我们需要从启动配置数据库中删除Windows 8，在左侧您将看到一个标有“编辑启动菜单”的按钮，单击它即可开始。

On the right hand side, there will be a list of all the boot loaders that your computer has been configured to use. Select the entry named “Windows Developer Preview” once you have it highlighted click the delete button. You will be prompted with a confirmation message, choose ‘”yes”.

在右侧，将列出您的计算机已配置为使用的所有引导加载程序。 突出显示后，选择名为“ Windows Developer Preview”的条目，然后单击“删除”按钮。 系统将提示您确认消息，选择“是”。

Now that Windows 7, is the only entry in the database. We need to set it as the default option. To do this select the check box, under the Default column.

现在，Windows 7是数据库中的唯一条目。 我们需要将其设置为默认选项。 为此，请选中“默认”列下的复选框。

Since Windows 7 is going to be our only operating system, we should also select the radio button labeled “Skip the boot menu” under the Timeout Options.

由于Windows 7将成为我们唯一的操作系统，因此我们还应该选择“超时选项”下标有“跳过启动菜单”的单选按钮。

You can now click the Save Settings button. To check that the changes have been made, you should reboot, you should boot straight into Windows 7.

现在，您可以单击“保存设置”按钮。 要检查是否已进行更改，应重新引导，然后直接引导进入Windows 7。

Editors Note: From here depending on which method you used to dual-boot, the finishing touches will be different. If you used the classic method, the next section applies to you, if you used the VHD method skip to the last section.

编者注：从这里开始，取决于您用于双重引导的方法，最后的修饰会有所不同。 如果您使用经典方法，则下一部分适用于您，如果您使用VHD方法，则跳至最后一部分。

画龙点睛(经典双启动) (Finishing Touches (Classic Dual-Boot))

We still need to reclaim the space that your new partition stole. This can be done through the Disk Management MMC snap-in, to launch the snap-in press the Windows Key + R to launch a run box, type “diskmgmt.msc” into the run box.

我们仍然需要回收新分区窃取的空间。 这可以通过“磁盘管理” MMC管理单元来完成，要启动该管理单元，请按Windows键+ R以启动运行框，在运行框中键入“ diskmgmt.msc”。

Note: After completing the following any information or data that you had in Windows 8 will be lost.

注意：完成以下操作后，您在Windows 8中拥有的所有信息或数据都将丢失。

When the Disk Management snap-in has loaded, we need to delete the volume on which Windows 8 resides. To do that right click on the drive in the list and click on the Delete Volume option in the context menu. You will be prompted and warned that all data will be lost, select yes to continue.

加载“磁盘管理”管理单元后，我们需要删除Windows 8所在的卷。 为此，请右键单击列表中的驱动器，然后单击上下文菜单中的“删除卷”选项。 将提示您并警告所有数据将丢失，请选择是继续。

You should now see that you have an empty partition denoted by its black header.

现在，您应该看到具有黑色标题表示的空分区。

Now right click on the the partition the partition with the blue header directly before it, and select Extend Volume from the context menu.

现在，右键单击该分区，该分区的紧前面是蓝色标题，然后从上下文菜单中选择“扩展卷”。

This will open a wizard, you don’t have to change any settings so just click next, next, finish. Once you have completed that you PC will be back to how it was before. If the above method applied to you, this is where you stop, as the next section only applies to those of you who dual-booted using a VHD.

这将打开一个向导，您无需更改任何设置，因此只需单击下一步，下一步，完成。 完成后，您的PC将恢复到以前的状态。 如果上述方法适用于您，那么您将在此处停止，因为下一节仅适用于使用VHD双启动的用户。

画龙点睛(VHD方法) (Finishing Touches (VHD Method))

The only thing that you have to do now is to delete the VHD File, from the root of your C:\ Drive.

现在唯一要做的就是从C：\ Drive的根目录中删除VHD文件。

Download EasyBCD

下载EasyBCD

翻译自: https://www.howtogeek.com/75878/how-to-uninstall-or-remove-windows-8-from-your-dual-boot-setup/

windows10卸载程序