docker hub 设置_如何将SmartThings Hub恢复出厂设置
docker hub 设置
If you ever decide to sell or give your SmartThings hub to someone else, you’ll want to make sure that you reset it to the factory defaults, so the new owner can start from a clean slate. Here’s how to do that.
如果您决定出售或将SmartThings集线器出售给其他人，则需要确保将其重置为出厂默认设置，以便新所有者可以从头开始。 这是这样做的方法。
Keep in mind that factory resetting your SmartThings hub will erase everything, including the connections for all your sensors, as well as any automation tasks and routines that you have set up in the app.
请记住，在工厂重置SmartThings集线器会清除所有内容，包括所有传感器的连接以及在应用程序中设置的任何自动化任务和例程。
The process is pretty easy, and is similar to how you would reset a router. Start by locating the recessed red button on the back of the SmartThings hub.
该过程非常简单，并且与重置路由器的过程类似。 首先找到SmartThings集线器背面的红色凹进按钮。
Next, grab a paper clip or other skinny object. The hole is big enough that it can fit pencils and most pens. A mechanical pencil like the one shown below works great.
接下来，抓住一个回形针或其他皮包骨头的物体。 该Kong足够大，可以容纳铅笔和大多数笔。 如下图所示的自动铅笔效果很好。
Insert the paper clip or pen in the recessed hole, then press and hold down on the red button for about 30 seconds. The LED light on the front of the hub will flash yellow. Once it stops flashing and remains solid yellow, let go of the reset button.
将回形针或笔插入凹槽，然后按住红色按钮约30秒钟。 集线器前面的LED灯将闪烁黄色。 一旦它停止闪烁并保持稳定的黄色，松开复位按钮。
The LED light will turn different colors throughout the rest process, including purple and blue. It should take around ten minutes for the hub to completely reset. When it’s done, the LED light will turn green and you’ll be all set.
在其余的整个过程中，LED灯将变成不同的颜色，包括紫色和蓝色。 集线器完全重置大约需要十分钟。 完成后，LED灯将变为绿色，您将全部准备就绪。
Again, factory resetting your SmartThings hub will completely erase everything, so be sure that resetting the hub is something you’re absolutely positive you want do, or else you’ll be setting everything back up again just like when you first bought it.
同样，在工厂重置SmartThings集线器会完全擦除所有内容，因此请确保重置集线器是您绝对想要的事情，否则，就像您第一次购买时一样，将所有内容重新备份。
翻译自: https://www.howtogeek.com/308546/how-to-factory-reset-the-smartthings-hub/
docker hub 设置