GitHub开源项目:用于构建接入网络和模块化网络服务的平台
源代码:https://github.com/facebookincubator/magma
作者:Facebook Incubator
Author Intro:We work hard to contribute our work back to the web, mobile, big data, & infrastructure communities. NB: members must have two-factor auth.
Readme Table of Contents
Magma
Magma is an open-source software platform that gives network operators an open, flexible and extendable mobile core network solution. Magma enables better connectivity by:
- Allowing operators to offer cellular service without vendor lock-in with a modern, open source core network
- Enabling operators to manage their networks more efficiently with more automation, less downtime, better predictability, and more agility to add new services and applications
- Enabling federation between existing MNOs and new infrastructure providers for expanding rural infrastructure
- Allowing operators who are constrained with licensed spectrum to add capacity and reach by using Wi-Fi and CBRS
Magma Architecture
The figure below shows the high-level Magma architecture. Magma is 3GPP generation (2G, 3G, 4G or upcoming 5G networks) and access network agnostic (cellular or WiFi). It can flexibly support a radio access network with minimal development and deployment effort.
Magma has three major components:
-
Access Gateway: The Access Gateway (AGW) provides network services and policy enforcement. In an LTE network, the AGW implements an evolved packet core (EPC), and a combination of an AAA and a PGW. It works with existing, unmodified commercial radio hardware.
-
Orchestrator: Orchestrator is a cloud service that provides a simple and consistent way to configure and monitor the wireless network securely. The Orchestrator can be hosted on a public/private cloud. The metrics acquired through the platform allows you to see the analytics and traffic flows of the wireless users through the Magma web UI.
-
Federation Gateway: The Federation Gateway integrates the MNO core network with Magma by using standard 3GPP interfaces to existing MNO components. It acts as a proxy between the Magma AGW and the operator's network and facilitates core functions, such as authentication, data plans, policy enforcement, and charging to stay uniform between an existing MNO network and the expanded network with Magma.
Developer Prereqs
We develop all components of the system on virtual machines managed by Vagrant. This helps us ensure that every developer has a consistent development for cloud and gateway development. We support macOS and Linux host operating systems, and developing on Windows should be possible but has not been tested.
First, install Virtualbox and Vagrant so you can set up your development VMs.
Then, install some additional prereqs (replace brew
with your OS-appropriate package manager as necessary):
$ brew install python3
$ pip3 install ansible fabric3 requests
$ vagrant plugin install vagrant-vbguest
Running the System
With the prereqs out of the way, we can now set up a minimal end-to-end system on your development environment. In this README, we'll start by running the LTE access gateway and orchestrator cloud inside their development VM's, and registering your local access gateway with your local cloud for management.
We will be spinning up 3 virtual machines for this full setup, so you'll probably want to do this on a system with at least 8GB of memory. Our development VM's are in the 192.168.80.0/24 address space, so make sure that you don't have anything running which hijacks that (e.g. v*n).
In the following steps, note the prefix in terminal commands. HOST
means to run the indicated command on your host machine, CLOUD-VM
on the cloud
vagrant machine under orc8r/cloud
, and MAGMA-VM
on the magma
vagrant machine under lte/gateway
.
Provisioning the Virtual Machines
Go ahead and open up 2 fresh terminal tabs. Start in
Terminal Tab 1:
We'll be setting up the LTE access gateway VM here.
HOST [magma]$ cd lte/gateway
HOST [magma/lte/gateway]$ vagrant up
This will take a few minutes. Switch over to
Terminal Tab 2:
Here, we'll be setting up the orchestrator cloud and datastore VMs. The datastore VM runs a PostgreSQL instance.
HOST [magma]$ cd orc8r/cloud
HOST [magma/orc8r/cloud]$ vagrant up datastore
HOST [magma/orc8r/cloud]$ vagrant up cloud
An Ansible error about a .cache/test_certs
directory being missing is benign. If you see an error early on about VirtualBox guest additions failing to install, you have a few extra steps to take after the provisioning fails:
HOST [magma/orc8r/cloud]$ vagrant reload cloud
HOST [magma/orc8r/cloud]$ vagrant provision cloud
This will re-run the Ansible provisioning. It'll be a lot quicker this time around since most of the steps will be skipped.
Initial Build
Once all those jobs finish (should only be 5 minutes or so), we can build the code for the first time and run it. Start in
Terminal Tab 1:
HOST [magma/lte/gateway]$ vagrant ssh
MAGMA-VM [/home/vagrant]$ cd magma/lte/gateway
MAGMA-VM [/home/vagrant/magma]$ make run
This will take a while (we have a lot of CXX files to build). It's a good time to switch over to
Terminal Tab 2:
Here, we'll build and run all of our orchestrator cloud services. We'll also use this time to register the client certificate you'll need to access the API gateway for the controller running on your cloud VM.
HOST [magma/orc8r/cloud]$ vagrant ssh
CLOUD-VM [/home/vagrant]$ cd magma/orc8r/cloud
CLOUD-VM [/home/vagrant/magma/orc8r/cloud]$ make run
Again, this will take a while. While both these builds are churning, it's a good time to grab lunch, or a coffee.
If you're reading this because you recently nuked your VMs, you have one more thing to do. This magma/.cache
folder stays around even when you destroy your VMs. But if you're starting with a blank datastore VM, the cert that your browser has isn't registered with the system anymore (you deleted those tables). We have a Make target that will re-register the cached test cert with your datastore VM:
CLOUD-VM [/home/vagrant]$ cd magma/orc8r/cloud
CLOUD-VM [/home/vagrant/magma/orc8r/cloud]$ make restore_admin_operator
Connecting Your Local LTE Gateway to Your Local Cloud
At this point, you will have built all the code in the LTE access gateway and the orchestrator cloud. All the services on the LTE access gateway and orchestrator cloud are running, but your gateway VM isn't yet set up to communicate with your local cloud VM.
We have a fabric command set up to do this:
HOST [magma]$ cd lte/gateway
HOST [magma/lte/gateway]$ fab register_vm
At this point, your access gateway VM is streaming configuration from your cloud VM and sending status and metrics back to your cloud VM.
If you want to see what the access gateway is doing, you can vagrant ssh magma
inside lte/gateway
, then do a sudo tail -f /var/log/syslog
. If everything above went smoothly, you should eventually (give it a minute or two) see something along the lines of:
MAGMA-VM$ sudo service [email protected]* stop
MAGMA-VM$ sudo service [email protected] restart
MAGMA-VM$ sudo tail -f /var/log/syslog
Sep 27 22:57:35 magma-dev magmad[6226]: [2018-09-27 22:57:35,550 INFO root] Checkin Successful!
Sep 27 22:57:55 magma-dev magmad[6226]: [2018-09-27 22:57:55,684 INFO root] Processing config update g1
Sep 27 22:57:55 magma-dev control_proxy[6418]: 2018-09-27T22:57:55.683Z [127.0.0.1 -> streamer-controller.magma.test,8443] "POST /magma.Streamer/GetUpdates HTTP/2" 200 7bytes 0.009s
Using the NMS UI
Magma provides an UI for configuring and monitoring the networks. To run the UI, first install Docker in your host. Then:
HOST [magma]$ cd nms/fbcnms-projects/magmalte
HOST [magma/nms/fbcnms-projects/magmalte] $
docker-compose up -d
HOST [magma/nms/fbcnms-projects/magmalte] $
docker-compose run magmalte yarn run setAdminPassword [email protected] password1234
After this, you will be able to access the UI by visiting https://localhost, and using the email [email protected]
and password password1234
. If you see Gateway Error 502, don't worry, the NMS can take upto 60 seconds to finish starting up.
Join the Magma Community
- Mailing lists:
- Join magma-dev for technical discussions
- Join magma-announce for announcements
- Discord:
- magma_dev channel
See the CONTRIBUTING file for how to help out.
License
Magma is BSD License licensed, as found in the LICENSE file. The EPC is OAI is offered under the OAI Apache 2.0 license, as found in the LICENSE file in the OAI directory.