h5垂直幻灯片_如何在Google幻灯片中使幻灯片垂直

h5垂直幻灯片

When you open a new presentation in Google Slides, the slides are horizontal by default. Luckily, if you want to change them from horizontal to vertical, it’s a simple process you can do in a couple of steps.

当您在Google幻灯片中打开新的演示文稿时，默认情况下幻灯片是水平的。 幸运的是，如果要将它们从水平更改为垂直，可以通过几个步骤完成此简单过程。

Fire up your browser, head to Google Slides, and open a new presentation.

启动浏览器，转到Google幻灯片，然后打开一个新的演示文稿。

After the presentation opens up, click File > Page Setup.

演示文稿打开后，单击文件>页面设置。

Next, click on the drop-down list and choose “Custom” from the choices below.

接下来，单击下拉列表，然后从下面的选择中选择“自定义”。

In the text fields that appear, type in the dimensions you want your slides to appear. The first box is for width, and the second is for height, while the drop-down box provides other measurements, such as centimeters, pixels, and points.

在出现的文本字段中，输入您希望幻灯片显示的尺寸。 第一个框用于宽度，第二个框用于高度，而下拉框提供其他度量，例如厘米，像素和点。

For a default slide, the dimensions are 10 x 5.62 inches. Swap the two numbers around to rotate the slide into a vertical position. It will look like this:

对于默认幻灯片，尺寸为10 x 5.62英寸。 交换两个数字以将幻灯片旋转到垂直位置。 它看起来像这样：

When you’re done, hit the Enter key or press “Apply” to make your slides vertical.

完成后，请按Enter键或按“应用”以使幻灯片垂直。

All slides added will be in the vertical orientation. There isn’t a way to incorporate both vertical and horizontal slides in a single presentation at the time of writing.

所有添加的幻灯片将处于垂直方向。 在撰写本文时，没有一种方法可以将垂直和水平幻灯片同时包含在一个演示文稿中。

That’s all there is to it. This method can be applied to existing slides in a presentation as well. However, it’s not recommended since the content on each slide would need to be resized and repositioned.

这里的所有都是它的。 此方法也可以应用于演示文稿中的现有幻灯片。 但是，由于每张幻灯片上的内容都需要调整大小和位置，因此不建议这样做。

翻译自: https://www.howtogeek.com/450580/how-to-make-slides-vertical-in-google-slides/

h5垂直幻灯片