Docker多主机安装Zookeeper集群
单台宿主机（192.168.192.128），启动三个zookeeper容器。
这里涉及一个问题，就是Docker容器之间通信的问题，这个很重要！
Docker有三种网络模式，bridge、host、none，在你创建容器的时候，不指定--network默认是bridge。
bridge：为每一个容器分配IP，并将容器连接到一个docker0虚拟网桥，通过docker0网桥与宿主机通信。也就是说，此模式下，你不能用宿主机的IP+容器映射端口来进行Docker容器之间的通信。
host：容器不会虚拟自己的网卡，配置自己的IP，而是使用宿主机的IP和端口。这样一来，Docker容器之间的通信就可以用宿主机的IP+容器映射端口
none：无网络。
=====================================================
先在本地创建目录：
[[email protected] admin]# mkdir /usr/local/zookeeper-cluster [[email protected] admin]# mkdir /usr/local/zookeeper-cluster/node1 [[email protected] admin]# mkdir /usr/local/zookeeper-cluster/node2 [[email protected] admin]# mkdir /usr/local/zookeeper-cluster/node3 [[email protected] admin]# ll /usr/local/zookeeper-cluster/ total 0 drwxr-xr-x. 2 root root 6 Aug 28 23:02 node1 drwxr-xr-x. 2 root root 6 Aug 28 23:02 node2 drwxr-xr-x. 2 root root 6 Aug 28 23:02 node3
然后执行命令启动
docker run -d -p 2181:2181 -p 2888:2888 -p 3888:3888 --name zookeeper_node1 --privileged --restart always \ -v /usr/local/zookeeper-cluster/node1/volumes/data:/data \ -v /usr/local/zookeeper-cluster/node1/volumes/datalog:/datalog \ -v /usr/local/zookeeper-cluster/node1/volumes/logs:/logs \ -e ZOO_MY_ID=1 \ -e "ZOO_SERVERS=server.1=192.168.192.128:2888:3888;2181 server.2=192.168.192.128:2889:3889;2182 server.3=192.168.192.128:2890:3890;2183" 3487af26dee9 docker run -d -p 2182:2181 -p 2889:2888 -p 3889:3888 --name zookeeper_node2 --privileged --restart always \ -v /usr/local/zookeeper-cluster/node2/volumes/data:/data \ -v /usr/local/zookeeper-cluster/node2/volumes/datalog:/datalog \ -v /usr/local/zookeeper-cluster/node2/volumes/logs:/logs \ -e ZOO_MY_ID=2 \ -e "ZOO_SERVERS=server.1=192.168.192.128:2888:3888;2181 server.2=192.168.192.128:2889:3889;2182 server.3=192.168.192.128:2890:3890;2183" 3487af26dee9 docker run -d -p 2183:2181 -p 2890:2888 -p 3890:3888 --name zookeeper_node3 --privileged --restart always \ -v /usr/local/zookeeper-cluster/node3/volumes/data:/data \ -v /usr/local/zookeeper-cluster/node3/volumes/datalog:/datalog \ -v /usr/local/zookeeper-cluster/node3/volumes/logs:/logs \ -e ZOO_MY_ID=3 \ -e "ZOO_SERVERS=server.1=192.168.192.128:2888:3888;2181 server.2=192.168.192.128:2889:3889;2182 server.3=192.168.192.128:2890:3890;2183" 3487af26dee9
【坑】
乍一看，没什么问题啊，首先映射端口到宿主机，然后三个zookeeper之间的访问地址则是宿主机IP:映射端口，没毛病啊；
看我前面讲的网络模式就能看出问题，ZOO_SERVERS里面的IP有问题，犯这个错误都是不了解Docker的网络模式的。什么错误往下看。
关于ZOO_SERVERS
什么意思呢，3.5.0开始，不应该再使用clientPort和clientPortAddress配置参数。相反，这些信息现在是server关键字规范的一部分。
端口映射三个容器不一样，比如2181/2182/2183，因为是一台宿主机嘛，端口不能冲突，如果你不在同一台机器，就不用修改端口。
最后的那个参数是镜像ID，也可以是镜像名称:TAG。
--privileged=true参数是为了解决【chown: changing ownership of '/data': Permission denied】，也可以省略true
执行结果：
[[email protected] admin]# docker run -d -p 2181:2181 -p 2888:2888 -p 3888:3888 --name zookeeper_node1 --privileged --restart always \ > -v /usr/local/zookeeper-cluster/node1/volumes/data:/data \ > -v /usr/local/zookeeper-cluster/node1/volumes/datalog:/datalog \ > -v /usr/local/zookeeper-cluster/node1/volumes/logs:/logs \ > -e ZOO_MY_ID=1 \ > -e "ZOO_SERVERS=server.1=192.168.192.128:2888:3888;2181 server.2=192.168.192.128:2889:3889;2182 server.3=192.168.192.128:2890:3890;2183" 3487af26dee9 4bfa6bbeb936037e178a577e5efbd06d4a963e91d67274413b933fd189917776 [[email protected] admin]# docker run -d -p 2182:2181 -p 2889:2888 -p 3889:3888 --name zookeeper_node2 --privileged --restart always \ > -v /usr/local/zookeeper-cluster/node2/volumes/data:/data \ > -v /usr/local/zookeeper-cluster/node2/volumes/datalog:/datalog \ > -v /usr/local/zookeeper-cluster/node2/volumes/logs:/logs \ > -e ZOO_MY_ID=2 \ > -e "ZOO_SERVERS=server.1=192.168.192.128:2888:3888;2181 server.2=192.168.192.128:2889:3889;2182 server.3=192.168.192.128:2890:3890;2183" 3487af26dee9 dbb7f1f323a09869d043152a4995e73bad5f615fd81bf11143fd1c28180f9869 [[email protected] admin]# docker run -d -p 2183:2181 -p 2890:2888 -p 3890:3888 --name zookeeper_node3 --privileged --restart always \ > -v /usr/local/zookeeper-cluster/node3/volumes/data:/data \ > -v /usr/local/zookeeper-cluster/node3/volumes/datalog:/datalog \ > -v /usr/local/zookeeper-cluster/node3/volumes/logs:/logs \ > -e ZOO_MY_ID=3 \ > -e "ZOO_SERVERS=server.1=192.168.192.128:2888:3888;2181 server.2=192.168.192.128:2889:3889;2182 server.3=192.168.192.128:2890:3890;2183" 3487af26dee9 6dabae1d92f0e861cc7515c014c293f80075c2762b254fc56312a6d3b450a919 [[email protected] admin]#
查看启动的容器
[[email protected] admin]# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 6dabae1d92f0 3487af26dee9 "/docker-entrypoin..." 31 seconds ago Up 29 seconds 8080/tcp, 0.0.0.0:2183->2181/tcp, 0.0.0.0:2890->2888/tcp, 0.0.0.0:3890->3888/tcp zookeeper_node3 dbb7f1f323a0 3487af26dee9 "/docker-entrypoin..." 36 seconds ago Up 35 seconds 8080/tcp, 0.0.0.0:2182->2181/tcp, 0.0.0.0:2889->2888/tcp, 0.0.0.0:3889->3888/tcp zookeeper_node2 4bfa6bbeb936 3487af26dee9 "/docker-entrypoin..." 46 seconds ago Up 45 seconds 0.0.0.0:2181->2181/tcp, 0.0.0.0:2888->2888/tcp, 0.0.0.0:3888->3888/tcp, 8080/tcp zookeeper_node1 [[email protected] admin]#
不是说有错误吗？怎么还启动成功了？？我们来看下节点1的启动日志
[[email protected] admin]# docker logs -f 4bfa6bbeb936 ZooKeeper JMX enabled by default ... 2019-08-29 09:20:22,665 [myid:1] - WARN [WorkerSender[myid=1]:[email protected]] - Cannot open channel to 2 at election address /192.168.192.128:3889 java.net.ConnectException: Connection refused (Connection refused) at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:350) at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:206) at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:188) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392) at java.net.Socket.connect(Socket.java:589) at org.apache.zookeeper.server.quorum.QuorumCnxManager.connectOne(QuorumCnxManager.java:648) at org.apache.zookeeper.server.quorum.QuorumCnxManager.connectOne(QuorumCnxManager.java:705) at org.apache.zookeeper.server.quorum.QuorumCnxManager.toSend(QuorumCnxManager.java:618) at org.apache.zookeeper.server.quorum.FastLeaderElection$Messenger$WorkerSender.process(FastLeaderElection.java:477) at org.apache.zookeeper.server.quorum.FastLeaderElection$Messenger$WorkerSender.run(FastLeaderElection.java:456) at java.lang.Thread.run(Thread.java:748) 2019-08-29 09:20:22,666 [myid:1] - WARN [WorkerSender[myid=1]:[email protected]] - Cannot open channel to 3 at election address /192.168.192.128:3890 java.net.ConnectException: Connection refused (Connection refused) at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:350) at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:206) at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:188) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392) at java.net.Socket.connect(Socket.java:589) at org.apache.zookeeper.server.quorum.QuorumCnxManager.connectOne(QuorumCnxManager.java:648) at org.apache.zookeeper.server.quorum.QuorumCnxManager.connectOne(QuorumCnxManager.java:705) at org.apache.zookeeper.server.quorum.QuorumCnxManager.toSend(QuorumCnxManager.java:618) at org.apache.zookeeper.server.quorum.FastLeaderElection$Messenger$WorkerSender.process(FastLeaderElection.java:477) at org.apache.zookeeper.server.quorum.FastLeaderElection$Messenger$WorkerSender.run(FastLeaderElection.java:456) at java.lang.Thread.run(Thread.java:748)
连接不上2 和 3，为什么呢，因为在默认的Docker网络模式下，通过宿主机的IP+映射端口，根本找不到啊！他们有自己的IP啊！如下：
[[email protected] admin]# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 6dabae1d92f0 3487af26dee9 "/docker-entrypoin..." 5 minutes ago Up 5 minutes 8080/tcp, 0.0.0.0:2183->2181/tcp, 0.0.0.0:2890->2888/tcp, 0.0.0.0:3890->3888/tcp zookeeper_node3 dbb7f1f323a0 3487af26dee9 "/docker-entrypoin..." 6 minutes ago Up 6 minutes 8080/tcp, 0.0.0.0:2182->2181/tcp, 0.0.0.0:2889->2888/tcp, 0.0.0.0:3889->3888/tcp zookeeper_node2 4bfa6bbeb936 3487af26dee9 "/docker-entrypoin..." 6 minutes ago Up 6 minutes 0.0.0.0:2181->2181/tcp, 0.0.0.0:2888->2888/tcp, 0.0.0.0:3888->3888/tcp, 8080/tcp zookeeper_node1 [[email protected] admin]# docker inspect 4bfa6bbeb936 "Networks": { "bridge": { "IPAMConfig": null, "Links": null, "Aliases": null, "NetworkID": "5fc1ce4362afe3d34fdf260ab0174c36fe4b7daf2189702eae48101a755079f3", "EndpointID": "368237e4c903cc663111f1fe33ac4626a9100fb5a22aec85f5eccbc6968a1631", "Gateway": "172.17.0.1", "IPAddress": "172.17.0.2", "IPPrefixLen": 16, "IPv6Gateway": "", "GlobalIPv6Address": "", "GlobalIPv6PrefixLen": 0, "MacAddress": "02:42:ac:11:00:02" } } } } ] [[email protected] admin]# docker inspect dbb7f1f323a0 "Networks": { "bridge": { "IPAMConfig": null, "Links": null, "Aliases": null, "NetworkID": "5fc1ce4362afe3d34fdf260ab0174c36fe4b7daf2189702eae48101a755079f3", "EndpointID": "8a9734044a566d5ddcd7cbbf6661abb2730742f7c73bd8733ede9ed8ef106659", "Gateway": "172.17.0.1", "IPAddress": "172.17.0.3", "IPPrefixLen": 16, "IPv6Gateway": "", "GlobalIPv6Address": "", "GlobalIPv6PrefixLen": 0, "MacAddress": "02:42:ac:11:00:03" } } } } ] [[email protected] admin]# docker inspect 6dabae1d92f0 "Networks": { "bridge": { "IPAMConfig": null, "Links": null, "Aliases": null, "NetworkID": "5fc1ce4362afe3d34fdf260ab0174c36fe4b7daf2189702eae48101a755079f3", "EndpointID": "b10329b9940a07aacb016d8d136511ec388de02bf3bd0e0b50f7f4cbb7f138ec", "Gateway": "172.17.0.1", "IPAddress": "172.17.0.4", "IPPrefixLen": 16, "IPv6Gateway": "", "GlobalIPv6Address": "", "GlobalIPv6PrefixLen": 0, "MacAddress": "02:42:ac:11:00:04" } } } } ]
node1---172.17.0.2
node2---172.17.0.3
node3---172.17.0.4
既然我们知道了它有自己的IP，那又出现另一个问题了，就是它的ip是动态的，启动之前我们无法得知。有个解决办法就是创建自己的bridge网络，然后创建容器的时候指定ip。
【正确方式开始】
[[email protected] admin]# docker network create --driver bridge --subnet=172.18.0.0/16 --gateway=172.18.0.1 zoonet 8257c501652a214d27efdf5ef71ff38bfe222c3a2a7898be24b8df9db1fb3b13 [[email protected] admin]# docker network ls NETWORK ID NAME DRIVER SCOPE 5fc1ce4362af bridge bridge local 6aa33e21444e host host local 20e563b93ce9 none null local 8257c501652a zoonet bridge local [[email protected] admin]# docker network inspect 8257c501652a [ { "Name": "zoonet", "Id": "8257c501652a214d27efdf5ef71ff38bfe222c3a2a7898be24b8df9db1fb3b13", "Created": "2019-08-29T06:08:01.442601483-04:00", "Scope": "local", "Driver": "bridge", "EnableIPv6": false, "IPAM": { "Driver": "default", "Options": {}, "Config": [ { "Subnet": "172.18.0.0/16", "Gateway": "172.18.0.1" } ] }, "Internal": false, "Attachable": false, "Containers": {}, "Options": {}, "Labels": {} } ]
然后我们修改一下zookeeper容器的创建命令。
docker run -d -p 2181:2181 --name zookeeper_node1 --privileged --restart always --network zoonet --ip 172.18.0.2 \ -v /usr/local/zookeeper-cluster/node1/volumes/data:/data \ -v /usr/local/zookeeper-cluster/node1/volumes/datalog:/datalog \ -v /usr/local/zookeeper-cluster/node1/volumes/logs:/logs \ -e ZOO_MY_ID=1 \ -e "ZOO_SERVERS=server.1=172.18.0.2:2888:3888;2181 server.2=172.18.0.3:2888:3888;2181 server.3=172.18.0.4:2888:3888;2181" 3487af26dee9 docker run -d -p 2182:2181 --name zookeeper_node2 --privileged --restart always --network zoonet --ip 172.18.0.3 \ -v /usr/local/zookeeper-cluster/node2/volumes/data:/data \ -v /usr/local/zookeeper-cluster/node2/volumes/datalog:/datalog \ -v /usr/local/zookeeper-cluster/node2/volumes/logs:/logs \ -e ZOO_MY_ID=2 \ -e "ZOO_SERVERS=server.1=172.18.0.2:2888:3888;2181 server.2=172.18.0.3:2888:3888;2181 server.3=172.18.0.4:2888:3888;2181" 3487af26dee9 docker run -d -p 2183:2181 --name zookeeper_node3 --privileged --restart always --network zoonet --ip 172.18.0.4 \ -v /usr/local/zookeeper-cluster/node3/volumes/data:/data \ -v /usr/local/zookeeper-cluster/node3/volumes/datalog:/datalog \ -v /usr/local/zookeeper-cluster/node3/volumes/logs:/logs \ -e ZOO_MY_ID=3 \ -e "ZOO_SERVERS=server.1=172.18.0.2:2888:3888;2181 server.2=172.18.0.3:2888:3888;2181 server.3=172.18.0.4:2888:3888;2181" 3487af26dee9
1. 由于2888 、3888 不需要暴露，就不映射了；
2. 指定自己的网络，并指定IP；
3. 每个容器之间环境是隔离的，所以容器内所用的端口一样：2181/2888/3888
运行结果：
[[email protected] admin]# docker run -d -p 2181:2181 --name zookeeper_node1 --privileged --restart always --network zoonet --ip 172.18.0.2 \ > -v /usr/local/zookeeper-cluster/node1/volumes/data:/data \ > -v /usr/local/zookeeper-cluster/node1/volumes/datalog:/datalog \ > -v /usr/local/zookeeper-cluster/node1/volumes/logs:/logs \ > -e ZOO_MY_ID=1 \ > -e "ZOO_SERVERS=server.1=172.18.0.2:2888:3888;2181 server.2=172.18.0.3:2888:3888;2181 server.3=172.18.0.4:2888:3888;2181" 3487af26dee9 50c07cf11fab2d3b4da6d8ce48d8ed4a7beaab7d51dd542b8309f781e9920c36 [[email protected] admin]# docker run -d -p 2182:2181 --name zookeeper_node2 --privileged --restart always --network zoonet --ip 172.18.0.3 \ > -v /usr/local/zookeeper-cluster/node2/volumes/data:/data \ > -v /usr/local/zookeeper-cluster/node2/volumes/datalog:/datalog \ > -v /usr/local/zookeeper-cluster/node2/volumes/logs:/logs \ > -e ZOO_MY_ID=2 \ > -e "ZOO_SERVERS=server.1=172.18.0.2:2888:3888;2181 server.2=172.18.0.3:2888:3888;2181 server.3=172.18.0.4:2888:3888;2181" 3487af26dee9 649a4dbfb694504acfe4b8e11b990877964477bb41f8a230bd191cba7d20996f [[email protected] admin]# docker run -d -p 2183:2181 --name zookeeper_node3 --privileged --restart always --network zoonet --ip 172.18.0.4 \ > -v /usr/local/zookeeper-cluster/node3/volumes/data:/data \ > -v /usr/local/zookeeper-cluster/node3/volumes/datalog:/datalog \ > -v /usr/local/zookeeper-cluster/node3/volumes/logs:/logs \ > -e ZOO_MY_ID=3 \ > -e "ZOO_SERVERS=server.1=172.18.0.2:2888:3888;2181 server.2=172.18.0.3:2888:3888;2181 server.3=172.18.0.4:2888:3888;2181" 3487af26dee9 c8bc1b9ae9adf86e9c7f6a3264f883206c6d0e4f6093db3200de80ef39f57160 [[email protected] admin]# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES c8bc1b9ae9ad 3487af26dee9 "/docker-entrypoin..." 17 seconds ago Up 16 seconds 2888/tcp, 3888/tcp, 8080/tcp, 0.0.0.0:2183->2181/tcp zookeeper_node3 649a4dbfb694 3487af26dee9 "/docker-entrypoin..." 22 seconds ago Up 21 seconds 2888/tcp, 3888/tcp, 8080/tcp, 0.0.0.0:2182->2181/tcp zookeeper_node2 50c07cf11fab 3487af26dee9 "/docker-entrypoin..." 33 seconds ago Up 32 seconds 2888/tcp, 3888/tcp, 0.0.0.0:2181->2181/tcp, 8080/tcp zookeeper_node1 [[email protected] admin]#
进入容器内部验证一下：
[[email protected] admin]# docker exec -it 50c07cf11fab bash [email protected]:/apache-zookeeper-3.5.5-bin# ./bin/zkServer.sh status ZooKeeper JMX enabled by default Using config: /conf/zoo.cfg Client port found: 2181. Client address: localhost. Mode: follower [email protected]:/apache-zookeeper-3.5.5-bin# exit exit [[email protected] admin]# docker exec -it 649a4dbfb694 bash [email protected]:/apache-zookeeper-3.5.5-bin# ./bin/zkServer.sh status ZooKeeper JMX enabled by default Using config: /conf/zoo.cfg Client port found: 2181. Client address: localhost. Mode: leader [email protected]:/apache-zookeeper-3.5.5-bin# exit exit [[email protected] admin]# docker exec -it c8bc1b9ae9ad bash [email protected]:/apache-zookeeper-3.5.5-bin# ./bin/zkServer.sh status ZooKeeper JMX enabled by default Using config: /conf/zoo.cfg Client port found: 2181. Client address: localhost. Mode: follower [email protected]:/apache-zookeeper-3.5.5-bin# exit exit [[email protected] admin]#
在验证一下创建节点
开启防火墙，以供外部访问
firewall-cmd --zone=public --add-port=2181/tcp --permanent firewall-cmd --zone=public --add-port=2182/tcp --permanent firewall-cmd --zone=public --add-port=2183/tcp --permanent systemctl restart firewalld firewall-cmd --list-all
在本地，我用zookeeper的客户端连接虚拟机上的集群：
可以看到连接成功！
集群安装方式二：通过docker stack deploy或docker-compose安装
这里用docker-compose。先安装docker-compose
[[email protected] admin]# curl -L "https://github.com/docker/compose/releases/download/1.24.1/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 617 0 617 0 0 145 0 --:--:-- 0:00:04 --:--:-- 145 100 15.4M 100 15.4M 0 0 131k 0 0:02:00 0:02:00 --:--:-- 136k [[email protected] admin]# chmod +x /usr/local/bin/docker-compose
检查版本（验证是否安装成功）
[[email protected] admin]# docker-compose --version docker-compose version 1.24.1, build 4667896b
卸载的话
rm /usr/local/bin/docker-compose
开始配置，新建三个挂载目录
[[email protected] admin]# mkdir /usr/local/zookeeper-cluster/node4 [[email protected] admin]# mkdir /usr/local/zookeeper-cluster/node5 [[email protected] admin]# mkdir /usr/local/zookeeper-cluster/node6
新建任意目录，然后在里面新建一个文件
[[email protected] admin]# mkdir DockerComposeFolder [[email protected] admin]# cd DockerComposeFolder/ [[email protected] DockerComposeFolder]# vim docker-compose.yml
文件内容如下：（自定义网络见上面）
version: '3.1'
services:
zoo1:
image: zookeeper
restart: always
privileged: true
hostname: zoo1
ports:
- 2181:2181
volumes: # 挂载数据
- /usr/local/zookeeper-cluster/node4/data:/data
- /usr/local/zookeeper-cluster/node4/datalog:/datalog
environment:
ZOO_MY_ID: 4
ZOO_SERVERS: server.4=0.0.0.0:2888:3888;2181 server.5=zoo2:2888:3888;2181 server.6=zoo3:2888:3888;2181
networks:
default:
ipv4_address: 172.18.0.14
zoo2:
image: zookeeper
restart: always
privileged: true
hostname: zoo2
ports:
- 2182:2181
volumes: # 挂载数据
- /usr/local/zookeeper-cluster/node5/data:/data
- /usr/local/zookeeper-cluster/node5/datalog:/datalog
environment:
ZOO_MY_ID: 5
ZOO_SERVERS: server.4=zoo1:2888:3888;2181 server.5=0.0.0.0:2888:3888;2181 server.6=zoo3:2888:3888;2181
networks:
default:
ipv4_address: 172.18.0.15
zoo3:
image: zookeeper
restart: always
privileged: true
hostname: zoo3
ports:
- 2183:2181
volumes: # 挂载数据
- /usr/local/zookeeper-cluster/node6/data:/data
- /usr/local/zookeeper-cluster/node6/datalog:/datalog
environment:
ZOO_MY_ID: 6
ZOO_SERVERS: server.4=zoo1:2888:3888;2181 server.5=zoo2:2888:3888;2181 server.6=0.0.0.0:2888:3888;2181
networks:
default:
ipv4_address: 172.18.0.16
networks: # 自定义网络
default:
external:
name: zoonet
注意yaml文件里不能有tab，只能有空格。
关于version与Docker版本的关系如下：
然后执行（-d后台启动）
docker-compose -f docker-compose.yml up -d
查看已启动的容器
[[email protected] DockerComposeFolder]# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES a2c14814037d zookeeper "/docker-entrypoin..." 6 minutes ago Up About a minute 2888/tcp, 3888/tcp, 8080/tcp, 0.0.0.0:2183->2181/tcp dockercomposefolder_zoo3_1 50310229b216 zookeeper "/docker-entrypoin..." 6 minutes ago Up About a minute 2888/tcp, 3888/tcp, 0.0.0.0:2181->2181/tcp, 8080/tcp dockercomposefolder_zoo1_1 475d8a9e2d08 zookeeper "/docker-entrypoin..." 6 minutes ago Up About a minute 2888/tcp, 3888/tcp, 8080/tcp, 0.0.0.0:2182->2181/tcp dockercomposefolder_zoo2_1
进入一个容器
[[email protected] DockerComposeFolder]# docker exec -it a2c14814037d bash [email protected]:/apache-zookeeper-3.5.5-bin# ./bin/zkCli.sh Connecting to localhost:2181 .... WatchedEvent state:SyncConnected type:None path:null [zk: localhost:2181(CONNECTED) 0] [zk: localhost:2181(CONNECTED) 1] ls / [zookeeper] [zk: localhost:2181(CONNECTED) 2] create /hi Created /hi [zk: localhost:2181(CONNECTED) 3] ls / [hi, zookeeper]
进入另一个容器
[[email protected] DockerComposeFolder]# docker exec -it 50310229b216 bash [email protected]:/apache-zookeeper-3.5.5-bin# ./bin/zkCli.sh Connecting to localhost:2181 ... WatchedEvent state:SyncConnected type:None path:null [zk: localhost:2181(CONNECTED) 0] ls / [hi, zookeeper]
本地客户端连接集群：
zkCli.cmd -server 192.168.192.128:2181,192.168.192.128:2182,192.168.192.128:2183
查看
停止所有活动容器
删除所有已停止的容器
更多docker-compose的命令：
[[email protected] DockerComposeFolder]# docker-compose --help Define and run multi-container applications with Docker. Usage: docker-compose [-f <arg>...] [options] [COMMAND] [ARGS...] docker-compose -h|--help Options: -f, --file FILE Specify an alternate compose file (default: docker-compose.yml) -p, --project-name NAME Specify an alternate project name (default: directory name) --verbose Show more output --log-level LEVEL Set log level (DEBUG, INFO, WARNING, ERROR, CRITICAL) --no-ansi Do not print ANSI control characters -v, --version Print version and exit -H, --host HOST Daemon socket to connect to --tls Use TLS; implied by --tlsverify --tlscacert CA_PATH Trust certs signed only by this CA --tlscert CLIENT_CERT_PATH Path to TLS certificate file --tlskey TLS_KEY_PATH Path to TLS key file --tlsverify Use TLS and verify the remote --skip-hostname-check Don't check the daemon's hostname against the name specified in the client certificate --project-directory PATH Specify an alternate working directory (default: the path of the Compose file) --compatibility If set, Compose will attempt to convert keys in v3 files to their non-Swarm equivalent Commands: build Build or rebuild services bundle Generate a Docker bundle from the Compose file config Validate and view the Compose file create Create services down Stop and remove containers, networks, images, and volumes events Receive real time events from containers exec Execute a command in a running container help Get help on a command images List images kill Kill containers logs View output from containers pause Pause services port Print the public port for a port binding ps List containers pull Pull service images push Push service images restart Restart services rm Remove stopped containers run Run a one-off command scale Set number of containers for a service start Start services stop Stop services top Display the running processes unpause Unpause services up Create and start containers version Show the Docker-Compose version information