生物传感器工程系列2

Development Kits for Bio-module: M001A

A completed Bio-sensor project including software and hardware solutions, to make an all-in-one,including ECG, RESP, GSR ,HR, PPG, HCM, SPO2, BIA and Motion etc.
生物传感器工程系列2

To provide system solutions and Turnkey projects, reducing customer development time and making an ideal option for health-monitoring, wearable devices.

The evaluation board includes a handheld cases with 4 electrodes, a motherboard with Bluetooth ble chipset, and a module pin-board; and software includes Bluetooth BLE firmware, desktop evaluation tool and mobile APP.

Evaluation board

As shown in the following figure, the evaluation board consists of cases, a Bluetooth motherboard, a pin-board (with bio-module), and a battery.

生物传感器工程系列2

Sensors

limb electrode

Two pairs of source/drive electrodes are attached to the cases of the evaluation board, which are mounted on two symmetrical left and right handles; As shown in the following side-view figure, they are used to measure body electrical and impedance activities.

生物传感器工程系列2

PPG sensor

The Bio-module is on-board, the pulse wave (PPG) sensing section contains a pair of red/green/IR led and multi-wavelength photodiode(PD); As shown in the following figure, used for PPG-related applications.

生物传感器工程系列2

Gsensor

Built-in 14 bits 3-axis Gsensor, range + 2G, + 4G, + 8g, + 16g;

RESOURCES

Contact

If you have technical problems and ideas to communicate with us, you can contact us by Email: [email protected].
For more information,please browse our homepage: www.feelkit.com.
Open-source project: https://github.com/feelkit/BIO_SENSOR