Bio-sensor–M001A

Bio-M001A is a Bio-module in healthcare;The Bio-module measures and transfers various types of bio-data including ECG, RESP, GSR, HR, PPG, HCM and BIA etc, integrated Bio-Processor with Analog Front-End to make an all-in-one health monitoring solution.

The algorithm core runs in Bio-Processor,including SPO2,motion recognition,dynamic heart rate monitoring, trend analysis of blood pressure, Emotional and mental stress etc.

The Bio-module integrates red (660 nm), green (520 nm) and infrared (940 nm) three-color LED and photodiode(PD) sensor to realize PPG-related applications; and supports four electrodes to achieve applications with human electrical activities and impedance activities; on-module 14-bit three-axis Gsensor for motion/sleep applications.

The Bio-module hardware interface supports SPI/I2C/UART optional, FPC connector reference DF37NB-30DS-0.4V.

FEATURES

Single lead ECG :

• 3 electrodes with right leg driver;
• Lead-off detect;

Bio-impedance with 4 electrodes:

• Built-in DAC and multi-frequency waveform generator;
• Support RESP,BIA and GSR etc;

PPG:

• on-module red (660 nm), green (520 nm) and infrared (940 nm) LED and PD;
• Support HR,SPO2 and Bio-assay etc;

Electrodes mean interface:

• Support electrodes as input keypad;
• Support pair of electrodes as data channel: eg,USB/UART etc;
• Support pair of electrodes as power charger channel;

Gsensor:

• Built-in 14 bits 3-axis Gsensor, range + 2G, + 4G, + 8g, + 16g;
• Pedometer,Action recognition;

Hardware interface:

• Optional SPI/UART/I2C;
• FPC connector DF37NB-30DS-0.4V,from hirose;

Small size, suitable for wristband devices:

• 22x26mm;

APPLICATIONS

1. Fitness,wristband devices;
2. Healthcare devices;
3. Mobile devices and robots etc;

RESOURCES

• Bio-sensor–M001A User’s Manual:
  https://github.com/feelkit/BIO_SENSOR/raw/master/DOC/M001A/M001A_UM_EN.pdf

• Evaluation kits for Bio-sensor–M001A:
  https://github.com/feelkit/BIO_SENSOR

• Bio-sensor–M001A CAD files (scale: 1:1, dxf file type):
  Module top layout, Module bottom layout.

• FPC Connector[DF37NB-30DS-0.4V]
  https://www.hirose.com/product/en/products/DF37/DF37NB-30DS-0.4V%2851%29/

Contact

If you have technical problems and ideas to communicate with us, you can contact us by Email: [email protected]

For more information,please browse our homepage: www.feelkit.com.
Open-source project: https://github.com/feelkit/BIO_SENSOR