显示器选三星还是飞利浦_如何设置飞利浦色相运动传感器

显示器选三星还是飞利浦

The latest accessory to join the Philips Hue line is a motion sensor that can not only turn on your lights when you walk into a room, but can also activate certain scenes depending on the time of day. Here’s how to set it up and have motion-activated lights ready to go in just a few minutes.

飞利浦Hue系列产品中最新加入的配件是运动传感器，它不仅可以在走进房间时打开灯光，还可以根据一天中的特定时间**某些场景。 这是设置方法并在短短几分钟内准备好动作**灯的方法。

是什么使色相运动传感器优于其他运动传感器 (What Makes the Hue Motion Sensor Better than Other Motion Sensors)

While you can use third-party motion sensors with your Philips Hue lights using various services, the Hue Motion Sensor ($40) makes it easier to turn your Hue bulbs into motion lights in your house. Plus, the Hue Motion Sensor can do way more than any other third-party motion sensor: it can sense whether it’s night out, and turn your lights on more dimly, for example. Or, if there’s a lot of sunlight in the room, it can automatically disable the motion-sensing lights so it isn’t being redundant.

虽然您可以使用飞利浦Hue灯通过各种服务使用第三方运动传感器，但Hue运动传感器 (40美元)使将Hue灯泡变成家中的运动灯更加容易。 另外，Hue运动传感器的功能比任何其他第三方运动传感器都多：例如，它可以感知夜幕降临，并昏暗地打开灯光。 或者，如果房间中有很多阳光，它可以自动禁用运动感应灯，因此不会多余。

You can also create different scenes within the Philips Hue app and assign them to certain time frames throughout the day. The motion sensor can even turn off lights after a certain amount of time has passed when no motion has been detected, from as little as one minute all the way to one hour.

您还可以在Philips Hue应用程序中创建不同的场景，并将它们分配给全天的特定时间范围。 在没有检测到运动的情况下经过一定时间后，运动传感器甚至可以关闭灯，从一分钟到一小时不等。

如何设置色相运动传感器 (How to Set Up the Hue Motion Sensor)

To set up the Hue Motion Sensor, start by opening up the Philips Hue app on your phone and tapping on the settings gear icon in the top-left corner of the screen.

要设置色相运动传感器，请先打开手机上的Philips Hue应用，然后点击屏幕左上角的设置齿轮图标。

On the next screen, tap on “Accessory setup”.

在下一个屏幕上，点击“附件设置”。

Tap on the round plus button down in the bottom-right corner.

点击右下角的加号按钮。

Select “Hue motion sensor”.

选择“色调运动传感器”。

Next, remove the plastic strip from the Hue Motion Sensor unit. It requires a bit of a tug, so don’t be afraid to pull hard. Once that’s done, wait a few seconds and confirm that you see an orange LED slowly flashing. If so, tap on “LED blinking” at the bottom.

接下来，从色相运动传感器单元上​​卸下塑料条。 它需要一点拖船，所以不要害怕用力拉。 完成后，请等待几秒钟，并确认您看到橙色LED缓慢闪烁。 如果是这样，请点击底部的“ LED闪烁”。

Select which room you want associated with the motion sensor. You can actually select more than one room, but there’s a maximum of three rooms in order to keep down connection and latency issues.

选择要与运动传感器关联的房间。 您实际上可以选择一个以上的房间，但是为了避免连接和延迟问题，最多可以有三个房间。

Next, you’ll place the sensor wherever you want in the room, preferably so that the motion sensor portion has a wide view of the room, especially the entrance. The motion sensor is freestanding, but it comes with a wall mount if you want to keep it off the floor or tables. Once you’ve found a place for it, tap on “Got it” in the app.

接下来，将传感器放置在房间中的任何位置，最好使运动传感器部分可以看到整个房间，尤其是入口。 运动传感器是独立式的，但如果要将其放在地板或桌子上，则可附带壁挂支架。 找到合适的地方后，在应用程序中点击“获得它”。

On the next screen, it will explain the default settings that the motion sensor will use. Don’t worry, though, as you can easily change these once you have motion sensor set up. Tap “Done” at the bottom.

在下一个屏幕上，它将说明运动传感器将使用的默认设置。 不过请不要担心，因为一旦设置了运动传感器，就可以轻松更改这些设置。 点击底部的“完成”。

Your Hue Motion Sensor will now appear in the list of other Hue accessories that you have. On this screen, you can also quickly enable or disable the motion sensor at any time by tapping on the toggle switch to the right.

现在，色相运动传感器将出现在您拥有的其他色相配件列表中。 在此屏幕上，您还可以随时通过点击右侧的拨动开关来快速启用或禁用运动传感器。

Tapping on the motion sensor in the list will bring up the settings that you can customize. On that screen, you can choose which rooms you want the motion sensor to work in, as well as how the lights turn on based on the time of day. So if it’s nighttime, the motion sensor will turn your lights on to a dim setting, compared to other times where you can have the lights turn on full blast.

点击列表中的运动传感器将显示您可以自定义的设置。 在该屏幕上，您可以选择要让运动传感器工作的房间，以及根据一天中的时间打开灯的方式。 因此，如果是在夜间，与其他可以完全开启灯光的时间相比，运动传感器会将灯光打开到暗淡的设置。

The Hue Motion Sensor even has an ambient light sensor, so it knows if it’s already bright enough in the room so it doesn’t needlessly turn lights on. And of course, you can also choose how long lights remain on after it begins detecting no more motion in a room.

色相运动传感器甚至还具有环境光传感器，因此它可以知道房间内是否已经足够明亮，因此不必不必要地打开灯。 当然，您也可以选择在开始检测到房间不再运动后，灯保持多长时间。

Unfortunately, you can’t simply just tell the motion sensor to turn on lights. Instead, you have to assign it a scene, so if you haven’t created scenes in the Philips Hue app, you’ll need to do that first.

不幸的是，您不能简单地告诉运动传感器打开灯。 相反，您必须为其分配一个场景，因此，如果尚未在Philips Hue应用程序中创建场景，则需要首先执行该操作 。

The Hue Motion Sensor is by far one of the best motion sensors you could possibly use with your Hue lights. As we mentioned earlier, you can use third-party motion sensors and have them communicate with your Hue lights through SmartThings or IFTTT, but the functionality is nowhere near as good as the Hue Motion Sensor.

到目前为止，色相运动传感器是可以与色相灯一起使用的最佳运动传感器之一。 如前所述，您可以使用第三方运动传感器，并使它们通过SmartThings或IFTTT与Hue灯通信，但是功能远不及Hue运动传感器。

Unfortunately, it’s not HomeKit-compatible, so you can’t control other smarthome devices with it, like turning on a smart outlet when motion is detected. This obviously isn’t a big deal for Android users, but Apple users might be disappointed in the lack of HomeKit support.

不幸的是，它与HomeKit不兼容，因此您无法使用它控制其他智能家居设备，例如在检测到运动时打开智能插座。 对于Android用户而言，这显然不是什么大问题，但是对于Apple用户而言，由于缺少HomeKit支持而可能会感到失望。

Other than that, the Hue Motion Sensor does way more than I originally expected, so you can be sure to get a lot of use out of it, especially in rooms where a light switch may not be in the most convenient location.

除此之外，Hue Motion Sensor的功能超出了我最初的预期，因此您可以肯定会从中获得很多使用，尤其是在电灯开关可能不在最方便的位置的房间中。

翻译自: https://www.howtogeek.com/274953/how-to-set-up-the-philips-hue-motion-sensor/

显示器选三星还是飞利浦