集合整理
1. map接口的实现
这两个类最大的不同在于:
(1)Hashtable是线程安全的,它的方法是同步了的,可以直接用在多线程环境中。
(2)而HashMap则不是线程安全的。在多线程环境中,需要手动实现同步机制。
1.1 hashmap
基本属性:
/** 默认初始化大小
* The default initial capacity - MUST be a power of two.
*/
static final int DEFAULT_INITIAL_CAPACITY = 1 << 4; // aka 16
/** 加载因子 用于扩容
* The load factor used when none specified in constructor.
*/
static final float DEFAULT_LOAD_FACTOR = 0.75f;
/** table原始值
* An empty table instance to share when the table is not inflated.
*/
static final Entry<?,?>[] EMPTY_TABLE = {};
/**
* The table, resized as necessary. Length MUST Always be a power of two.
*/
transient Entry<K,V>[] table = (Entry<K,V>[]) EMPTY_TABLE;
put(K, V)实现过程:
public V put(K key, V value) {
//初始化map大小
if (table == EMPTY_TABLE) {
inflateTable(threshold);
}
// 处理key为null,HashMap允许key和value为null
if (key == null)
return putForNullKey(value);
// 得到key的哈希码
int hash = hash(key);
// 通过哈希码计算出bucketIndex
int i = indexFor(hash, table.length);
// 取出bucketIndex位置上的元素,并循环单链表,判断key是否已存在
for (Entry<K,V> e = table[i]; e != null; e = e.next) {
Object k;
// 哈希码相同并且对象相同时
if (e.hash == hash && ((k = e.key) == key || key.equals(k))) {
//hashcode发生碰撞, 新值替换旧值,并返回旧值
V oldValue = e.value;
e.value = value;
e.recordAccess(this);
return oldValue;
}
}
// key不存在时,加入新元素
modCount++;
addEntry(hash, key, value, i);
return null;
}
/**
* 添加entry
* Adds a new entry with the specified key, value and hash code to
* the specified bucket. It is the responsibility of this
* method to resize the table if appropriate.
*
* Subclass overrides this to alter the behavior of put method.
*/
void addEntry(int hash, K key, V value, int bucketIndex) {
//判断是否超过阈值
if ((size >= threshold) && (null != table[bucketIndex])) {
resize(2 * table.length);
hash = (null != key) ? hash(key) : 0;
bucketIndex = indexFor(hash, table.length);
}
//添加entry
createEntry(hash, key, value, bucketIndex);
}
/**
* Like addEntry except that this version is used when creating entries
* as part of Map construction or "pseudo-construction" (cloning,
* deserialization). This version needn't worry about resizing the table.
*
* Subclass overrides this to alter the behavior of HashMap(Map),
* clone, and readObject.
*/
void createEntry(int hash, K key, V value, int bucketIndex) {
Entry<K,V> e = table[bucketIndex];
table[bucketIndex] = new Entry<>(hash, key, value, e);
size++;
}
hashmap流程图:1.2 hashTable
(1)是一个包含单向链的二维数组,table数组中是Entry<K,V>存储,entry对象;
(2)放入的value不能为空;
(3)线程安全的,所有方法均用synchronized修饰;
/** * Returns the value to which the specified key is mapped, * or {@code null} if this map contains no mapping for the key. * * <p>More formally, if this map contains a mapping from a key * {@code k} to a value {@code v} such that {@code (key.equals(k))}, * then this method returns {@code v}; otherwise it returns * {@code null}. (There can be at most one such mapping.) * * @param key the key whose associated value is to be returned * @return the value to which the specified key is mapped, or * {@code null} if this map contains no mapping for the key * @throws NullPointerException if the specified key is null * @see #put(Object, Object) */ public synchronized V get(Object key) { Entry tab[] = table; int hash = hash(key); int index = (hash & 0x7FFFFFFF) % tab.length; for (Entry<K,V> e = tab[index] ; e != null ; e = e.next) { if ((e.hash == hash) && e.key.equals(key)) { return e.value; } } return null; } /** * Maps the specified <code>key</code> to the specified * <code>value</code> in this hashtable. Neither the key nor the * value can be <code>null</code>. <p> * * The value can be retrieved by calling the <code>get</code> method * with a key that is equal to the original key. * * @param key the hashtable key * @param value the value * @return the previous value of the specified key in this hashtable, * or <code>null</code> if it did not have one * @exception NullPointerException if the key or value is * <code>null</code> * @see Object#equals(Object) * @see #get(Object) */ public synchronized V put(K key, V value) { // Make sure the value is not null if (value == null) { throw new NullPointerException(); } // Makes sure the key is not already in the hashtable. Entry tab[] = table; int hash = hash(key); int index = (hash & 0x7FFFFFFF) % tab.length; for (Entry<K,V> e = tab[index] ; e != null ; e = e.next) { if ((e.hash == hash) && e.key.equals(key)) { V old = e.value; e.value = value; return old; } } modCount++; if (count >= threshold) { // Rehash the table if the threshold is exceeded rehash(); tab = table; hash = hash(key); index = (hash & 0x7FFFFFFF) % tab.length; } // Creates the new entry. Entry<K,V> e = tab[index]; tab[index] = new Entry<>(hash, key, value, e); count++; return null; }
1.3. ConcurrentHashMap线程安全
从ConcurrentHashMap代码中可以看出,它引入了一个“分段锁”的概念,具体可以理解为把一个大的Map拆分成N个小的HashTable,根据key.hashCode()来决定把key放到哪个HashTable中。
在ConcurrentHashMap中,就是把Map分成了N个Segment,put和get的时候,都是现根据key.hashCode()算出放到哪个Segment中:
弱一致性:http://ifeve.com/concurrenthashmap-weakly-consistent/
ConcurrentHashMap和Hashtable主要区别就是围绕着锁的粒度以及如何锁,可以简单理解成把一个大的HashTable分解成多个,形成了锁分离。
get(K)
/* * Returns the value to which the specified key is mapped,
* or {@code null} if this map contains no mapping for the key.
*
* <p>More formally, if this map contains a mapping from a key
* {@code k} to a value {@code v} such that {@code key.equals(k)},
* then this method returns {@code v}; otherwise it returns
* {@code null}. (There can be at most one such mapping.)
*
* @throws NullPointerException if the specified key is null
*/
public V get(Object key) {
Segment<K,V> s; // manually integrate access methods to reduce overhead
HashEntry<K,V>[] tab;
int h = hash(key);
long u = (((h >>> segmentShift) & segmentMask) << SSHIFT) + SBASE;
if ((s = (Segment<K,V>)UNSAFE.getObjectVolatile(segments, u)) != null &&
(tab = s.table) != null) {
for (HashEntry<K,V> e = (HashEntry<K,V>) UNSAFE.getObjectVolatile
(tab, ((long)(((tab.length - 1) & h)) << TSHIFT) + TBASE);
e != null; e = e.next) {
K k;
if ((k = e.key) == key || (e.hash == h && key.equals(k)))
return e.value;
}
}
return null;
}
/**
* Maps the specified key to the specified value in this table.
* Neither the key nor the value can be null.
*
* <p> The value can be retrieved by calling the <tt>get</tt> method
* with a key that is equal to the original key.
*
* @param key key with which the specified value is to be associated
* @param value value to be associated with the specified key
* @return the previous value associated with <tt>key</tt>, or
* <tt>null</tt> if there was no mapping for <tt>key</tt>
* @throws NullPointerException if the specified key or value is null
*/
@SuppressWarnings("unchecked")
public V put(K key, V value) {
Segment<K,V> s;
if (value == null)
throw new NullPointerException();
int hash = hash(key);
int j = (hash >>> segmentShift) & segmentMask;
if ((s = (Segment<K,V>)UNSAFE.getObject // nonvolatile; recheck
(segments, (j << SSHIFT) + SBASE)) == null) // in ensureSegment
s = ensureSegment(j);
return s.put(key, hash, value, false);
}
2.arraylist 和LinkedList
1.ArrayList是实现了基于动态数组的数据结构,LinkedList基于链表的数据结构。
2.对于随机访问get和set,ArrayList觉得优于LinkedList,因为LinkedList要移动指针。
3.对于新增和删除操作add和remove,LinedList比较占优势,因为ArrayList要移动数据。
2.对于随机访问get和set,ArrayList觉得优于LinkedList,因为LinkedList要移动指针。
3.对于新增和删除操作add和remove,LinedList比较占优势,因为ArrayList要移动数据。
2.1 . arrayList
/**
* Appends the specified element to the end of this list.
*
* @param e element to be appended to this list
* @return <tt>true</tt> (as specified by {@link Collection#add})
*/
public boolean add(E e) {
ensureCapacityInternal(size + 1); // Increments modCount!!
elementData[size++] = e;
return true;
}
/**
* Removes the element at the specified position in this list.
* Shifts any subsequent elements to the left (subtracts one from their
* indices).
*
* @param index the index of the element to be removed
* @return the element that was removed from the list
* @throws IndexOutOfBoundsException {@inheritDoc}
*/
public E remove(int index) {
rangeCheck(index);
modCount++;
E oldValue = elementData(index);
int numMoved = size - index - 1;
if (numMoved > 0)
System.arraycopy(elementData, index+1, elementData, index,
numMoved);
elementData[--size] = null; // clear to let GC do its work
return oldValue;
}
/**
* Returns the element at the specified position in this list.
*
* @param index index of the element to return
* @return the element at the specified position in this list
* @throws IndexOutOfBoundsException {@inheritDoc}
*/
public E get(int index) {
rangeCheck(index);
return elementData(index);
}
2.2 .linkedList
/**
* Appends the specified element to the end of this list.
*
* <p>This method is equivalent to {@link #addLast}.
*
* @param e element to be appended to this list
* @return {@code true} (as specified by {@link Collection#add})
*/
public boolean add(E e) {
linkLast(e);
return true;
}
/**
* Links e as last element.
*/
void linkLast(E e) {
final Node<E> l = last;
final Node<E> newNode = new Node<>(l, e, null);
last = newNode;
if (l == null)
first = newNode;
else
l.next = newNode;
size++;
modCount++;
}
/**
* Removes the first occurrence of the specified element from this list,
* if it is present. If this list does not contain the element, it is
* unchanged. More formally, removes the element with the lowest index
* {@code i} such that
* <tt>(o==null ? get(i)==null : o.equals(get(i)))</tt>
* (if such an element exists). Returns {@code true} if this list
* contained the specified element (or equivalently, if this list
* changed as a result of the call).
*
* @param o element to be removed from this list, if present
* @return {@code true} if this list contained the specified element
*/
public boolean remove(Object o) {
if (o == null) {
for (Node<E> x = first; x != null; x = x.next) {
if (x.item == null) {
unlink(x);
return true;
}
}
} else {
for (Node<E> x = first; x != null; x = x.next) {
if (o.equals(x.item)) {
unlink(x);
return true;
}
}
}
return false;
}
/**
* Returns the element at the specified position in this list.
*
* @param index index of the element to return
* @return the element at the specified position in this list
* @throws IndexOutOfBoundsException {@inheritDoc}
*/
public E get(int index) {
checkElementIndex(index);
return node(index).item;
}