c# 鼠标床头_床头柜模式在Apple Watch上如何工作

c# 鼠标床头

Did you know your Apple Watch can double as a bedside clock while it’s charging? It’s called Nightstand mode, but there are some caveats you should know about before you get rid of your traditional alarm clock.

您是否知道Apple Watch可以在充电时兼作床头时钟？ 这称为床头柜模式，但是在摆脱传统闹钟之前，您应该了解一些警告。

什么是床头柜模式？ (What Is Nightstand Mode?)

When you put your Apple Watch on its charger and place it upright, it will automatically go into Nightstand Mode, which switches the screen from your usual watch face to a big digital clock that takes up the whole screen. This is to mimic what a traditional bedside clock would normally do.

将Apple Watch放在充电器上并直立放置时，它将自动进入Nightstand Mode(床头柜模式)，该模式将屏幕从通常的表盘切换为占用整个屏幕的大数字时钟。 这是为了模仿传统床头时钟通常会执行的操作。

Then, when you take your watch off of the charger, it will automatically exit Nightstand Mode and go back to displaying your normal watch face.

然后，当您将手表从充电器上取下来时，它将自动退出床头柜模式并返回显示正常的表盘。

Most of the time, your watch can sit upright when it’s connected to the charger, but if the specific wristband you have doesn’t allow you to do this, you can buy a cheap Apple Watch charging dock that sit your watch upright for Nightstand Mode instead.

大多数情况下，手表与充电器连接时可以直立放置，但是如果您的特定腕带不允许您这样做，则可以购买便宜的Apple Watch充电座 ，将其直立放置在床头柜模式下代替。

如何启用和禁用床头柜模式 (How to Enable and Disable Nightstand Mode)

Nightstand Mode is already enabled by default when you first set up your Apple Watch, but if you ever want to disable it (or enable it if it was disabled by chance), you can do so in the Apple Watch app on your iPhone.

首次设置Apple Watch时，默认情况下已启用“床头柜模式”，但是如果您要禁用它(或在偶然被禁用的情况下启用它)，则可以在iPhone上的Apple Watch应用程序中启用它。

Start by opening up the app, scrolling down, and tapping on “General”.

首先打开应用程序，向下滚动并点击“常规”。

Scroll down on the next screen and locate “Nightstand Mode”. Tap on the toggle switch off to the right to enable or disable it.

在下一个屏幕上向下滚动并找到“ Nightstand Mode”。 点击右侧的切换开关以启用或禁用它。

床头柜模式不起作用 (What Nightstand Mode Doesn’t Do)

Nightstand Mode seems pretty handy, but there are a lot of things that it doesn’t do, which can make it less useful than you might expect.

床头柜模式似乎很方便，但是它没有做很多事情，这使它的使用性可能比您预期的要差。

First off, when you have your Apple Watch in Nightstand Mode, the screen doesn’t stay on. Instead, it shuts off after a few seconds. To turn the screen back on, you just have to give the watch a light tap anywhere and it will illuminate for another few seconds.

首先，当您的Apple Watch处于Nightstand模式时，屏幕不会一直保持打开状态。 相反，它会在几秒钟后关闭。 要重新打开屏幕，只需在任何地方轻按一下手表，它就会点亮几秒钟。

This can be really inconvenient when you wake up in the middle of the night wondering what time it is, only to realize you have to reach over to turn the watch’s screen on while you’re half asleep.

当您半夜醒来想知道现在几点了时，这真的很不便，只是意识到您必须在半睡着的时候伸手去打开手表的屏幕。

You also can’t adjust the brightness of the screen whenever it does kick on. It’s fairly dim, but I wouldn’t be surprised if many others thought that it was a little too bright when it’s pitch black in the room and the screen sort of blinds you as it turns on.

当屏幕启动时，您也无法调整屏幕的亮度。 它相当暗，但是如果其他人认为它在房间里变成黑色并且屏幕在打开时使您蒙上阴影，那么我就不会感到惊讶。

Hopefully these subtle features get added in a future update update, but for the time being, it puts a huge damper on Nightstand Mode and prevents your Apple Watch from becoming a true alarm clock replacement.

希望这些微妙的功能会在将来的更新更新中添加，但是目前，它可以在床头柜模式上起到很大的作用，并可以防止Apple Watch成为真正的闹钟替代品。

翻译自: https://www.howtogeek.com/311211/how-nightstand-mode-works-on-the-apple-watch/

c# 鼠标床头