ROS usb_cam安装

1.创建工作空间http://blog.****.net/xiaocainiaoshangxiao/article/details/13293637

设置环境变量：

source /opt/ros/hydro/setup.bash

创建一个工作空间：

mkdir -p ~/catkin_ws/src

cd ~/catkin_ws/src

2.下载usb_cam包

git clone https://github.com/bosch-ros-pkg/usb_cam.git usb_cam

3.在catkin_ws中编译:
$mkdir build
$cd build
$cmake ..
$make

4.创建launch文件

<launch>
  <node name="usb_cam" pkg="usb_cam" type="usb_cam_node" output="screen" >
    <param name="video_device" value="/dev/video0" />
    <param name="image_width" value="640" />
    <param name="image_height" value="480" />
    <param name="pixel_format" value="mjpeg" />
    <param name="camera_frame_id" value="usb_cam" />
    <param name="io_method" value="mmap"/>
  </node>
  <node name="image_view" pkg="image_view" type="image_view" respawn="false" output="screen">
    <remap from="image" to="/usb_cam/image_raw"/>
    <param name="autosize" value="true" />
  </node>
</launch>

注意像素格式，有的可能是yuyv格式，需要做相应改动。

<param name="pixel_format" value="mjpeg" />改为： <param name="pixel_format" value="yuyv" />

写launch文件时写成txt格式，最后再更改类型为launch

5.测试

[email protected]:~/catkin_ws$ roslaunch usb_cam.launch

[email protected]:/opt/ros/indigo$ rosrun image_view image_view image:=/usb_cam/image_raw

相关推荐